Subtotal
$0.00
Shipping
$7.95
GST Inc
$0.00
Total
$7.95
Item: 2741-WG
Built-in swivel & direction for hose angle from tap
Shop now, pay later. Always interest-free.
We've made it easier than ever to get what you want, when you want it.
Helpful additions to the Angled Tap Protector
Now in Warm Grey colour!
The Angled Tap Protector allows you to change the direction of the hose from the tap, thereby reducing kinks in the hose and stress on tap fittings.
The Angled Tap Protector can change direction of the tap on two planes. Use it to change the direction of the hose and fittings coming from the tap by up to 90 degrees in any direction. Moving the outlet in this plane is firm and adjustments is up to 180 degrees.
The second plane allows the Angled Tap Protector to follow where the hose is being used. The outlet spins at the set angle, meaning less stress on fittings.
This product is particularly useful if you tap is positioned close to the ground. It allows the use of Hoselink Hose Fittings on any tap height.
|
Model Name
|
Angled Tap Protector |
|
Model Number
|
2741 |
| Tap Thread Fitting Size | 25mm (1") and 20mm (¾") with included reducer |
|
Material
|
ABS |
|
Colour
|
Warm Grey |
|
Fitting Size
|
12mm |
|
Maximum Pressure
|
550psi |
|
UV Resistant
|
Yes |
|
Assembly Required
|
No |
| Warranty | 12 months |
AustraliaSeems to work well.as you can spin around at all angles without fear of it snapping off
Australia Australia AustraliaThe first Angled Tap Protector blew apart while attached to a tap timer and dumped hundreds of litres of water before we noticed the problem. The replacement that was sent has just failed in the same manner. At least this time I had just turned the water on - about a 1/2 to 3/4 turn. The Angled Tap Protector had probably only been used twice. As currently implemented this product is not fit for purpose and there is no way that I'd turn on a tap with one fitted and then walk away from it.
Hi Bill, thank you for taking the time to leave a review! We pride ourselves on the quality of our products so this is disappointing to hear. It's certainly not a common issue we see happening. If you could get in touch with our customer service team on 1300 900 617 or via email at hoselink@hoselink.com.au we will be able to look into credit/refund options. Sorry for any inconvenience caused. Kind Regards, The Hoselink Team
AustraliaAfter less than 6 hours of use the top of the Angled Tap Protector - just below where it screws onto the tap - separated from the rest of the unit and about an hours worth of water was wasted. The unit looks like it just pulled apart - I can send photographs if requested. I have used many tap timers on this tap and none have failed in this manner so I doubt that I had a water pressure issue. The tap was only open about 1 turn as it feeds an underground weeper system and to much pressure can damage the small weeper hoses. Hopefully this is a "one off" but at this stage I cannot recommend this product.
Hi Bill, thank you for taking the time to leave a review on the Angled Tap Protector. We are extremely sorry to see this has happened. We have passed the photo sent through to our product team for review as this is not a common problem with this item therefore, hoping this is a one off too. As this is brand new, we have organised for a replacement to be sent out to you, hopefully this should last the distance. Of course, if you have any further issues, please let us know. Kind regards, The Hoselink Team
AustraliaI ordered two of these as they appeared to just what I needed for my garden hoses. I fitted the first one to my primary hose reel and noticed a small leak adjacent to the garden tap. After a few minutes the leak became worse and then the unit blew apart just above the swivel joint. Fortunately when I fitted the second unit it hasn’t leaked under pressure. Obviously the first unit was poorly assembled. I was not impressed by the quality and ordered two straight connectors instead and complained about the quality. I was impressed by your customer service as the replacement items were supplied free of charge and free postage. This is the first time I have had problems with Hoselink products and will continue to use them.
Hi Stewart, thank you for sharing your feedback with us. We apologise for the issue you encountered with the first unit of the Angled Tap Protector you ordered. We understand that the small leak and subsequent failure of the unit were unexpected and disappointing. We appreciate your understanding and patience throughout the process. It's great to hear that our customer service team were able to assist you promptly and resolve the issue by providing replacement items free of charge with free postage. Again, we apologise for any inconvenience caused by the quality issue you experienced. Your feedback is valuable to us, and we take it seriously as we continuously work to improve our products and manufacturing processes. Kind regards, The Hoselink Team
AustraliaFitted 2 units and both blew out under pressure and broke the first time they were used. Will be sending the other 2 back
Hi there, We apologize for the unfortunate experience you had with our angled tap protectors under pressure during their first use. This is certainly not the quality or performance we strive to deliver. We understand your frustration and inconvenience caused by this issue. We take product reliability very seriously, and we would like to investigate this matter further to understand what may have caused the units to fail. We kindly request that you contact our customer support team to provide more details about the incident. We are committed to finding a resolution and ensuring your satisfaction. You can contact us at hello@hoselink.com.au and one of our friendly customer service team members will be able to assist you with this. Kind Regards, The Hoselink Team
AustraliaWhere the swivel body joins the tap nut, broke off. It doesn’t follow the hose left and tight only up and down. I love all the rest of your products.
Hi there, Thanks for your review. We are sorry to see that this has broken. We to take pride in the quality off our products and have strict testing procedures, so this is disappointing to hear. Please feel free to contact us at hoselink@hoselink.com.au or call 1300 900 617 and one of our friendly customer service team members would love to help if you have any further questions or enquiries about this. Kind Regards, The Hoselink Team
AustraliaThis product makes it so easy I have it attached to a double head connector on the tap and it enables each hose attachment to move easily whether it is the small hose or the hose reel.... it makes life so much easier .... awesome purchase so glad I found the website. I recommend this product highly to everyone and such a reasonably priced product as I purchased 3
AustraliaA useful product to reduce leverage at the tap and reduce the risk of hose separation
