Perfect for large rectangular areas
See it in action! Watch a video featuring this product to learn more.
Hoselink’s Oscillating Sprinkler is specially designed for watering large sections of gardens and lawns.
This premium sprinkler performs well even with low water pressure and is particularly good for use with a Retractable Hose Reel.
The Oscillating Sprinkler has a number of adjustment controls ideal for all of your watering needs. It has a rectangular spray coverage that can be adjusted to cover an area up to 15m x 12m.
Featuring water flow control and a number of different spray settings, you can easily customise the saturation level and spray type of the Oscillating Sprinkler to suit a variety of gardens. This flexibility allows you to effortlessly water a narrow lawn, against an edge, or only one side of your lawn.
With its metal construction, you can rely on the durable Oscillating Sprinkler to remain sturdy and not tip over. It also features a built-in cleaner and fine mesh filter to protect it from dirt and debris.
The Oscillating Sprinkler comes pre-fitted with a Hoselink Accessory Connector (12mm) for a quick and easy connection to your Hoselink fitted hose. Therefore if you do not have any existing Hoselink fittings then you will need to purchase a Hose End Connector to attach this sprinkler to your hose.
Please Note: this product is not recommended for use with bore water.
|Model Name||Oscillating Sprinkler|
|Material||Zinc metal body with powder coating, impact ABS spray tube, brass|
|Spray Coverage Area||Up to 15m x 12m (dependant on water pressure)|
|Hose Fitting Size||12mm|
- Oscillating Sprinkler (x1)
- Hoselink Accessory Connector (x1)
- Fitting Instructions
Q. I can't find the cleaning pin on my Oscillating Sprinkler.
A. The cleaning pin is black and can be found at the end of the sprinkler, opposite to where the water goes in. Sometimes it can be quite tight to undo the first time. If you cannot undo the pin at the end, an opened paper clip can be substituted to clean the holes. Watch the product video for a demonstration for further information.
Q. My oscillating sprinkler is blocked, how do I clean it?
A. Use the cleaning pin to poke each of the fine holes. Unscrew the cleaning pin at the end of the sprinkler and flush water through the sprinkler to clear any grit. If your water supply is quite gritty, you may wish to try an In-line Water Filter to trap dirt at the tap.