Mini Sprinkler Kit
Perfect for watering garden beds, 10 sprinkler heads
Set the Mini Sprinkler Kit up in your garden bed to automatically water where you need it without the need for hand spraying.
This fully customisable kit includes a variety of sprinkler and drip nozzle heads so you can meet the watering requirements of individual plants. Set up the 4 Way Outlet with up to 4 hose sections by cutting the 10m 3/16" polypipe as needed. Additionally, this kit includes Hoselink connectors to ensure you achieve a watertight seal on the tap.
This kit includes the following components:
- 1x 4 Way Outlet (3/4" BSP Thread)
- 1x 10m Polypipe (3/16")
- 2x 90-degree Spray Nozzle
- 1x 180-degree Spray Nozzle
- 2x Shower Spray Nozzle
- 1x Rotor Sprinkler
- 1x Flow Control Valve
- 4x End Cap
- 1x T joint
- 1x Angled Mist Nozzle
- 2x Angled Drip Nozzle
- 1x Hoselink Accessory Connector
- 1x Hoselink Universal Tap Connector
Note: if the Mini Sprinkler Kit will be set up more than 2 metres away from the tap, you'll need to add a suitable length hose to get it to reach. Please refer to the product manual for more information about how to set up this system in your garden.
Additional components are available by calling customer service.
We recommend using a maximum of 6 sprinklers per 10m of hose. If additional sprinklers are required, run multiple lines using the 4-way outlet (included).
See more Irrigation Kits.
|Mini Sprinkler System|
|1x 4 Way Outlet (3/4" BSP Thread) |
1x 10m Polypipe (3/16")
2x 90-degree Spray Nozzle
1x 180-degree Spray Nozzle
2x Shower Spray Nozzle
1x Rotor Sprinkler
1x Flow Control Valve
4x End Cap
1x T joint
1x Angled Mist Nozzle
2x Angled Drip Nozzle
1x Hoselink Accessory Connector
1x Hoselink Universal Tap Connector
Q. Can I buy additional components to set up my system?
A. Yes, individual components are also available either on our website or from Customer Service - call 1300 900 617.
Q. My tap is a long way from where I want to set up the sprinkler system, what should I do?
A. You'll need to add an additional length of garden hose between the tap and where the 4 Way Outlet is situated. You can either use a hose you already have or purchase a new one, as long as it has a Hoselink Hose End Connector on either end, you'll still have a wateright system all the way through.
Dynamic coverage, particularly for specific beds that have difficult angles. Check out the integrity of the jet heads and you’ll see there will be no ongoing problems with clogged water exits.
Quite good. It would have been better for our situation if there were more 90 and 180 direction heads. Perhaps spare heads could be available to construct your own set.
Was a Super Quick and Easy!
There's always some bit of the garden, or in my case, orchard that doesn't get enough water. It's problem solved with the mini sprinkler kit and with the multiple heads there's no need to move it around. It's great.
I bought the Mini Sprinkler System for my Dad for Xmas because I have purchased various other Hoselink products and found them to be the best quality fittings available either online, or at hardware stores. They are 100% fail-proof and do exactly what they advertise - No Leaks! The Mini Sprinkler System is fantastic and can be relocated anywhere my hose will reach.
The mini sprinkler system is perfect for our front garden, with no water being wasted outside the actual bed. As we are on water restrictions, this was an important feature. Will most likely be getting a few more in the future.