Set the Mini Sprinkler Kit up in your garden bed to automatically water where you need it without the need for hand spraying.
This fully customisable kit includes a variety of sprinkler and drip nozzle heads so you can meet the watering requirements of individual plants. Set up the 4 Way Outlet with up to 4 hose sections by cutting the 10m 3/16" polypipe as needed. Additionally, this kit includes Hoselink connectors to ensure you achieve a watertight seal on the tap.
This kit includes the following components:
- 1x 4 Way Outlet (3/4" BSP Thread)
- 1x 10m Polypipe (3/16")
- 2x 90-degree Spray Nozzle
- 1x 180-degree Spray Nozzle
- 2x Shower Spray Nozzle
- 1x Rotor Sprinkler
- 1x Flow Control Valve
- 4x End Cap
- 1x T joint
- 1x Angled Mist Nozzle
- 2x Angled Drip Nozzle
- 1x Hoselink Accessory Connector
- 1x Hoselink Universal Tap Connector
Note: if the Mini Sprinkler Kit will be set up more than 2 metres away from the tap, you'll need to add a suitable length hose to get it to reach. Please refer to the product manual for more information about how to set up this system in your garden.
Additional components are available by calling customer service.
We recommend using a maximum of 6 sprinklers per 10m of hose. If additional sprinklers are required, run multiple lines using the 4-way outlet (included).
|Mini Sprinkler System|
|1x 4 Way Outlet (3/4" BSP Thread)
1x 10m Polypipe (3/16")
2x 90-degree Spray Nozzle
1x 180-degree Spray Nozzle
2x Shower Spray Nozzle
1x Rotor Sprinkler
1x Flow Control Valve
4x End Cap
1x T joint
1x Angled Mist Nozzle
2x Angled Drip Nozzle
1x Hoselink Accessory Connector
1x Hoselink Universal Tap Connector
Q. Can I buy additional components to set up my system?
A. Yes, individual components are also available either on our website or from Customer Service - call 1300 900 617.
Q. My tap is a long way from where I want to set up the sprinkler system, what should I do?
A. You'll need to add an additional length of garden hose between the tap and where the 4 Way Outlet is situated. You can either use a hose you already have or purchase a new one, as long as it has a Hoselink Hose End Connector on either end, you'll still have a wateright system all the way through.