Item: C2031BGAF
New drum valve, built to last. Now made in Australia!
|
Ordered Sep 10 |
Order Ready Sep 11 - Sep 13 |
Order Delivered Sep 18 - Sep 25
|
Free delivery within Australia for all orders $99 or more. Orders under $99 incur a $7.95 delivery fee.
We offer free returns & a 30-day money back guarantee on any purchase that does not meet your expectations. Simply email us at hello@hoselink.com.au
Free delivery on orders over $99
30-day money back guarantee
Free returns or exchanges
Shop now, pay later. Always interest-free.
We've made it easier than ever to get what you want, when you want it.
Helpful additions to the Hose End Connector with Flow Control | Gen 2
Gen 2 Hose Connector with Flow Control
The fitting that started it all, rebuilt from the ground up.
Adjust the flow or shut the water off right where you’re standing, without walking back to the tap. Flip the lever off, swap your spray gun, wand or other accessory, then flip it back on, all without getting wet.
Gen 2 is now made and assembled in Australia. It’s more compact, tested to be stronger and more durable than Gen 1, and backed by the same no-leak, no-burst promise Hoselink customers have relied on for over 20 years.
Fits standard 12mm garden hose
A barb and white split ring lock your hose and fitting together, so they won’t pull apart or leak. It’s designed for standard 12mm (1/2") garden hose. It uses the same connector face as the original, so it works with all your existing 12mm Hoselink fittings.
What’s new in Gen 2
|
Model Name
|
Hose End Connector with Flow Control | Gen 2 |
|
Model Number
|
C2031BGAF |
|
Material
|
Nylon, POM |
|
Colour
|
Warm Grey |
|
Hose Fitting Size
|
12mm |
|
Maximum Pressure
|
550psi |
|
UV Resistant
|
Yes |
| Assembly Required | Yes |
| Individual Item | Yes |
| Warranty | 3 years |
Not sure where to start? Download a manual for this product in a PDF format
Q. What does the Hose Connector with Flow Control do?
A. A lever on the connector lets you turn the water on and off and adjust the flow, right at the end of your hose. You can change accessories or pause watering without walking back to the tap.
Q. What is the difference between the Gen 2 and Gen 1 Connectors?
A. Gen 2 connectors have been redesigned from the ground up and are now made and assembled in Australia. They’re lighter, more compact, and tested to be stronger and more durable than Gen 1. Every Gen 2 connector also has a new o-ring that’s held in place, so it won’t fall out.
The Gen 2 Hose Connector with Flow Control also has a new drum valve and a strengthened lever, for a smoother on/off action.
Q. Are the Gen 2 and Gen 1 Connectors compatible?
A. Yes. Gen 1 and Gen 2 connectors have the same connector face, so you can mix and match them freely.
Q. Which hoses does it fit?
A. It’s designed for a standard 12mm (1/2") garden hose, measured across the inside of the hose. It won’t fit 18mm (3/4") or other sizes.
Q. How do I fit it?
A. Fit it to the spray end of your hose, the same way you’d fit a Hose End Connector.
Q. Can I use it at the tap end?
A. No. The valve only works with water flowing in one direction, out through the lever end. Fit it at the spray end of your hose, and use a Hose End Connector at the tap end.
Q. How do I remove it from my hose?
Item: 2751-2
Item: 3590-WG
Item: 2595-WG
Item: 5518-WG