Specs | 3052 | Fixed Ground Mount

Fixed Ground Mount
Model Name Fixed Ground Mount | Classic Series
Model Number 3052
Material Bracket (polypropylene), screws/washers (stainless steel), plugs (plastic)
Dimensions L23cm x W23cm x D23cm
Colour Black
Compatible With HOSELINK 10m, 15m, 20m, 25m, 30m Retractable Hose Reels
Not Suitable For Use With 3010, 3025, 3030 models
UV Resistant Yes
Corrosion Resistant Yes
Assembly Required Yes (you will need a drill)
Individual Item No
Warranty 1 year

 

Fitting Instructions
Overview:
  • Use the Fixed Ground Mount as a template to mark where to drill
  • The hardware pack contains 4 x stainless steel screws, 4 x masonry plugs and 4 x washers to secure it to the ground
Tools:
Electric hammer or rotary drill with a 12mm masonry bit for brick or masonry OR electric drill with a 5mm timber bit for timber; hammer; socket set (10mm bit)
Brick or Masonry Wall:
Drill 4 holes with electric hammer or rotary drill (using marked holes) with 12mm masonry bit, 60mm deep. Hammer in the 4 plugs. Attach the Fixed Ground Mount using the 4 screws & washers.
Tip for drilling brick or masonry: Mark and drill two holes. Line up the Fixed Ground Mount on the two drilled holes then mark the next two. Once marked, drill the final two holes. This method helps to get the alignment right.
Timber:
Mark and drill 4 holes with a 5mm timber drill bit, 60mm deep. Attach the Fixed Ground Mount using the 4 screws & washers. No plugs required.