FAQs | 5642-WG | Oscillating Sprinkler | Watering
Q. I can't find the cleaning pin on my Oscillating Sprinkler.
A. The cleaning pin is black and can be found at the end of the sprinkler, opposite to where the water goes in. Sometimes it can be quite tight to undo the first time. If you cannot undo the pin at the end, an opened paper clip can be substituted to clean the holes. Watch the product video for a demonstration for further information.
Q. My oscillating sprinkler is blocked, how do I clean it?
A. Use the cleaning pin to poke each of the fine holes. Unscrew the cleaning pin at the end of the sprinkler and flush water through the sprinkler to clear any grit. If your water supply is quite gritty, you may wish to try an In-line Water Filter to trap dirt at the tap.