FAQ's | 2423, 2423-WG | Hose Connector with Flow Control 12mm
Q. Can I use this product on any hose?
A. No, this Hose Connector with Flow Control 12mm is only suitable for use with a standard hose which has a 12mm diameter.
Q. How do I use the Hose Connector with Flow Control?
A. You need to fit it to the spray end of your hose, just like you would a Hoselink Hose End Connector. If you already have a Hose End Connector on the end of your hose, you can replace it with a Hose Connector with Flow Control.
Q. How do I remove the Hose End Connector from my hose?
A. Unscrew the nut and use a screwdriver to lever the white split ring a few centimetres up the hose. Place the whole connector and hose end into a cup of very hot water to soften the hose. Drain off the water, put the connector between your feet and pull the hose straight up.
Q. Can I use the Hose Connector with Flow Control at the tap end, as a tap?
A. No, this product must have water flowing out of it, not into it and will not work at the tap. A metal tap is a more reliable way to turn off the water supply.
Q. What does the Hose Connector with Flow Control do?
A. It has a ball valve inside that allows you to turn the water flow on or off and to adjust water pressure when needed. This makes it a convenient addition to your hose.