Nozzle Flow Meter
Install near sprayer to easily see water usage
The Nozzle Flow Meter is a useful device for measuring how much water you use for washing your car or to water your garden.
With a 3/4" thread, the gauge screws between the spray gun and Accessory Connector so you can easily see how much water you're using as you spray. There is some swivel movement in the device to allow for torsion between the sprayer and hose.
How it works
It measures 2 amounts: the volume of water per watering session and the accumulated water usage up to 999 litres.
The device resets the single use water usage meter when left inactive for 30 minutes. It will hold the cumulative usage amount until it is reset.
Accuracy of the flow meter gauge is expected to be above 95% but this can vary slightly depending on a number of variables. It should be noted this product is NOT a commercial measuring device.
See more Timers & Gauges.
|Model Name||Nozzle Flow Meter|
|Colour||Black & grey|
|Hose Fitting Size||12mm|
- customer service
- garden beds
Purchased 2 to replace an old meter and install new one. Great for keeping tabs on water tank usage. It would be handy for accumulated amount to go higher than 999 litres. Didn't happen on previous meter but this time when tightening onto spray nozzle top section gave small crack sound and now spins with small amount of water leaking. I now can't take off the spray head to fit plumber tape to stop small leak. Other than this very good at keeping tack of water usage.
Well the device is good and does what is expected but its fragile, I have actually now bought two because the first one broke easily where the connection connects to the handle and spray device. The threaded part is allowed to be a little flexible but its not strong with an flexible movement so I have now put my new flow meter on the actual inlet hose to my reel to protect it. As I said the flow meter works fine and its cheap so you cannot expect it to be bullet proof to garden / shed normal use hope this feedback is useful. At least I have spare parts from the first one I broke. Best regards
I have always had great service from Hoselink
Very good prompt service
I believe the product is quite useful and seems to be accurate, however I had an issue with the male thread section pulling off the main unit. I had not been aggressive with it or pulled the hoes via the trigger nozzle as this would place a lot of stain on the flow meter. The threaded section would not stay on the hose so I went onto your website and had an online chat with one of your team members. The issue was easily resolved and a new meter promptly shipped. Your customer service is nothing short of exceptional and i recommend your products to anyone who will listen!
I used the product once and it blow apart.
Hi Katrina, thank you for leaving us a review. Really sorry to hear you are experiencing issues with your Nozzle Flow Meter. We would really like to get some more information on this problem from you therefore, we will be in touch to resolve this. Kind regards, The Hoselink Team
The saved usage volumes shouldn't be so easily resettable by accidental pushes of the buttons. Would be better is they needed a 2+ second long pres, especially for the overall usage number. It doesnt work when using the water gun in mist mode!
I use this to measure water in and out of my Cravans Tanks. It told me that there is a big difference in CLAIMED capacity and USEABLE capcity.
We have four retractable hoses and a number of accessories and are very happy we chose Hoselink. Our most recent purchase was the Nozzle Flow Meter. The meter arrived promptly however part of the fitting broke on the first day. This was no problem for Hoselink who immediately dospatched a replacement which is perfect. When we eventually move we will again use Hoselink products - they just work.
Much sturdier than I expected and so far extremely accurate