See it in action! Watch a video featuring this product to learn more.
Only suitable for use with Hoselink's Hi-Flow Retractable Hose Reel with 14mm internal hose diameter - will not fit standard 12mm hoses.
Have full water control at your fingertips with Hoselink’s new design Hose Connector with Flow Control with easy-fit system and durable nylon construction.
Replace the standard Hose Connector on your Hi-Flow Retractable Hose Reel with this specially designed 14mm fitting to effectively turn the end of the hose into a tap! Please note water must flow out of the Hose Connector with Flow Control and not into it.
Want to change from your spray gun to a Super Jet Washer? Simple! Just push the lever to turn off the water and change your watering accessory, then turn the water back on. No getting wet or running back to the tap.
The Hose Connector with Flow Control can also be used to increase or decrease water pressure, without having to adjust your tap.
- Change spray accessories with ease
- Water flow adjustment at your fingertips
- Same fitting technology as all Hoselink no-burst hose fitting
It works by clamping your hose securely into your hose fitting so it won’t come apart. This unique and patented technology utilises a barb and white split ring that locks your hose and fitting together in a super tough connection making it practically impossible to break.
Please take care not to drop the Hose Connector with Flow Control on hard surfaces, such as concrete, as it can be damaged with rough use or mishandling. This product carries a 12 month warranty.
|Hose Connector with Flow Controller 14mm|
|Green and yellow|
Hose Fitting Size
- 1 x Hose Connector with Flow Control 14mm
Q. Can I use this product on any hose?
A. No, this Hose Connector with Flow Control 14mm is only suitable for use with Hoselink's Hi-Flow Retractable Hose Reel which has an internal diameter of 14mm compared to a standard hose which has a 12mm diameter.
Q. How do I use the Hose Connector with Flow Control?
A. You need to fit it to the spray end of your hose, just like you would a Hoselink Hose End Connector. If you already have a Hose End Connector on the end of your hose, you can replace it with a Hose Connector with Flow Control.
Q. How do I remove the Hose End Connector from my hose?
A. Unscrew the nut and use a screwdriver to lever the white split ring a few centimetres up the hose. Place the whole connector and hose end into a cup of very hot water to soften the hose. Drain off the water, put the connector between your feet and pull the hose straight up.
Q. Can I use the Hose Connector with Flow Control at the tap end, as a tap?
A. No, this product must have water flowing out of it, not into it and will not work at the tap. A metal tap is a more reliable way to turn off the water supply.
Q. What does the Hose Connector with Flow Control do?
A. It has a ball valve inside that allows you to turn the water flow on or off and to adjust water pressure when needed. This makes it a convenient addition to your hose.
What a great idea.
17 November 2017
11 November 2017
Hose Connector with Flow Control 14mm (Hi-Flow)
17 September 2017
hose connector with flow control
2 March 2017
Flow control connectod
10 February 2017