Additional Bracket (3001,3002,3003 only)

Universal Bracket System for models 3001,3002,3003

Click image(s) to enlarge.

19.90

Sold Out

(SKU: 3110)

Add To Wishlist

Shipping: Enter post code to calculate
- AAE Satchel - 8.25 Orders are sent with tracking via Australian Air Express courier service for parcels up to 5kg. AAE have Authority to Leave your parcel at the designated address WITHOUT a signature. If this is a concern and you do not have a safe place to leave a parcel, we recommend delivery via Australia Post.

Item not reviewed (write a review...)

This Universal Bracket is for our New Range of 10, 20 & 30m Auto Retract Hose Reels. Item Code: 3001, 3002 & 3003.

A bracket is supplied with each hose reel and this product is an ADDITIONAL BRACKET so you may move the hose reel between different locations.

Attach bracket to wall using supplied fasteners.
Use template (provided) to mark where to drill. The 3 screws & washers are for the top 3 holes and 2 stabilising pins are for the bottom 2 holes at the back of the bracket.

TOOLS: electric drill, 12mm or 5mm drill bit as appropriate (see below), hammer, socket set (10mm bit)

BRICK – drill 5 holes (using template) with 12mm bit, 60mm deep then hammer in the 5 plugs. Push the 2 stabilising pins into the bottom 2 plugs, halfway, then attach bracket using the 3 screws & washers.

TIMBER – drill holes as above, only with 5mm bit, 60mm deep. Push the 2 stabilising pins into holes halfway, then attach bracket using the 3 screws & washers. No plugs required.

Warranty

24 Month